Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Table 7-15
lists the parameters and definitions for setting the QUICKSET Name in a Bindery
environment or an NDS environment.
Table 7-15.
Parameters and Definitions for RPRINTER Mode
Parameter
Definition
Name
The default NETGEAR print server name, as displayed on the bar code label on the bottom of
the unit.
R
R is the name of the NetWare print server created on the file server to which the NETGEAR
print server (in RPRINTER mode) will connect.
P
New name of the print server. Do not change it unless necessary.
W, X
W and X are the names of the queues to be serviced by parallel ports 1 to 2, respectively. If
you do not enter W or X, then P1 and P2 are the default names of the queues for parallel ports
1 to 2, respectively.
F
F is the name of the file server that the NetWare print server R logs on to.
Examples of the commands are:
•
In the Binary environment
QUICKSET PS123456 PS1 /UN=Marketing /FS=Net311
The print server PS123456 has been set up as a remote printer that is attached to the NetWare
print server PS1 on the Net311 file server. The new name of the PS123456 print server (now in
RPRINTER mode) is Marketing.
•
In the NDS environment
QUICKSET PS123456 PS1 /UN=Marketing
The print server PS123456 has been set up as a remote printer that is attached to the NetWare
print server S1. The new name of the PS123456 print server (now in RPRINTER mode) is
Marketing.
7-24
Using Advanced Management Tools