Rear Panel - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Table 1-1. LED Descriptions (continued)
Label Color
NETWORK
(Model PS110
and PS113)
• Link Green
• 100M Green
• Tx Green
• Rx Green
• Col Amber
(collision)

Rear Panel

The rear panel of the Model PS104 Print Server and the Model PS105 Print Server has one parallel
PRINTER port, the rear panel of the Model PS110 Print Server has two parallel ports for printers
(PRINTER 1 and PRINTER 2), and the rear panel of the Model PS113 Print Server has three
parallel ports for printers (PRINTER 1, PRINTER 2, and PRINTER 3). The ports on the first two
print servers accept either a printer or another parallel device such as a plotter. The ports on the
second two print servers accept two or three ports, therefore, two or three parallel devices can be
connected and can operate simultaneously.
The Model PS104 Print Server has four 10BASE-T network ports. The Model PS105 Print Server
has four 10BASE-T network ports and one BNC network port. The Model PS110 and Model
PS113 Print Server each has one 10/100BASE-T network port. The 10/100BASE-T port is an
autonegotiation port that operates in 100 Mbps and in half-duplex mode when connected to a Fast
Ethernet network.
Introduction
Activity Description
On The link between the port and the network is good.
On The link between the port and the network is a half-duplex 100 Mbps
connection.
Off The link between the port and the network is a half-duplex 10 Mbps
connection.
Blinking The print server is sending data out of the port.
Blinking The print server is receiving data on the port.
Blinking Data collision is occurring on the network. Note that occasional
collisions are normal.
1-5