Model PS110 Print Server; 10 Mbps support on the Model PS104 Print Server ™ • FirstGear , a software program developed by NETGEAR, which provides Windows 95, Windows 98, and Windows NT users operating on a Microsoft network easy configuration of the print server •...
Customer Support Call your reseller or NETGEAR Customer Support in your area if there are any wrong, missing, or damaged parts. Keep the carton, including the original packing materials. Use them to repack the print server if you need to return it for repair.
Page 4
Product Illustration Start Here PRINTER NETWORK LEDs LEDs Print Server MODEL PS104 10/100 Mbps On=Link; Blinking=Rx Link/Act Alert PRINTER NETWORK PWR LED Front Panel of the Model PS104 Print Server PRINTER 2 PRINTER 1 NETWORK LEDs LEDs LEDs Print Server 10/100 Mbps PS110 MODEL...
Page 5
LEDs The following table describes the activity of the 8 LEDs on the front panel of the Model PS104 Print Server and the 10 LEDs on the Model PS110 Print Server. Label Color Activity Description PWR (power) Green Power is supplied to the print server. PRINTER, PRINTER 1, or PRINTER 2...
Page 6
Rear Panel The rear panel of the Model PS104 Print Server has one parallel PRINTER port, and the Model PS110 Print Server has two parallel ports for printers (PRINTER 1 and PRINTER 2). The ports on both print servers accept either printers or another parallel device such as a plotter. Because the Model PS110 Print Server has two PRINTER ports, two parallel devices can be connected and can operate simultaneously.
12VDC 1.2A Normal/Uplink Limited to 3 m in length Model PS104 Print Server NETWORK 12VDC 1.2A PRINTER Normal/Uplink Limited to 3 m NETGEAR Model in length RT328 router 8572FA Model PS104 Print Server 10 Mbps NETWORK 100 Mbps 12VDC 1.2A PRINTER...
Install the Print Server The print server can be placed on a desktop or any flat surface. To save work space, the print server can also be mounted with Velcro strips on the side of a printer. Connect the Printer Cables Connect a cable (not provided) from the printer to the parallel PRINTER port on the print server.
If the problem continues and you have completed all the preceding diagnoses, contact NETGEAR Customer Support. For the telephone number of the representative in your area, see “Customer Support” on the back cover of this installation guide.
Before proceeding with these instructions, make sure you have assigned a name to your workgroup. Install the FirstGear Administration Program FirstGear, a software program used with NETGEAR products for quick and easy installation, is provided on one disk included in your package contents. To install FirstGear on your PC: Insert the FirstGear Installation Disk in Drive A.
Page 11
Click on the icon of the print server that you want to configure, and then click on “Quick” to open the “Print Server Quick Setup” window. Type the name in the “Device Name” entry field (must be one string of characters: for example, MY_SERVER), if you want to change the factory default name of your print server.
Page 12
Set Up Each PC to Recognize the Print Server You must set up every PC that will print to the print server. Before proceeding, verify that: • The print server has been properly configured. • The print server is still powered on. •...
• The NetBEUI protocol is installed in the networked PC. desktop of the • The print server has been assigned a workgroup name (by networked PCs (not the using the NETGEAR Administration Program on the network administrators network administrators PC). PC).
Technical Specifications General Specifications Network Protocol and Standards Compatibility IEEE 802.3u, 100BASE-TX, Fast Ethernet IEEE 802.3i 10BASE-T CSMA/CD Interface Model PS104 Print Server Four 100BASE-T network ports (RJ-45) Model PS110 Print Server One 10/100BASE-T network port (RJ-45) Power Specifications Input voltage 100 to 240 V AC, 50 to 60 Hz, according to the power adapter Output voltage...
Page 15
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Certificate of the Manufacturer/Importer It is hereby certified that the Model PS104 or Model PS110 print server has been suppressed in accordance with the conditions set out in the BMPT-...
Australia: 1800-142-046 France: 0800-90-2078 Japan: 0120-66-5402 Korea: 00308-11-0319 New Zealand: 0800-444-626 Sweden: 020-790086 United Kingdom: (44) 171-571-5120 U.S./Canada: 800-211-2069 Internet/World Wide Web The NETGEAR Web page is at http://NETGEAR.baynetworks.com Defective or damaged merchandise can be returned to your point-of-sale representative. *M1-PS100NA-0*...