Tcp/Ip Menu Tab - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Table 7-4. NetWare RPrinter Menu Tab Fields (continued)
Field
Novell Printer Server
for P2
Frame Type

TCP/IP Menu Tab

Figure 7-6 shows the menu and its fields, and
and explains how to provide information in each field. For further information about TCP/IP, refer
to"Configuring the Print Server Using
Windows 98 Printing."
Figure 7-6. TCP/IP Menu Tab Window
7-10
Description
Enter the name of the NetWare print server to service the PRINTER 2 port of the
print server. If there is no PRINTER 2 port on the print server, this selection is not
available and is shadowed out.
Select the frame types used by your network (Ethernet 802.2, Ethernet 802.3,
Ethernet SNAP, and Ethernet II). By default, all four frame types are enabled.
TCP/IP" in
Table 7-5 lists the fields, describes their functions,
Chapter 3, "Microsoft Windows 95 and
Using Advanced Management Tools