Configuring Your Print Server; Determining A Device Name For Your Print Server; Using Your Print Server In A Netware 3.X Network - NETGEAR PS104 Installation And Reference Manual

Netgear ps104 print server: reference guide
Table of Contents

Advertisement

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
The following sections describe how to determine a device name for your print server and set up
the following three printing components on a Novell NetWare server:
Print queue
Print server
Print
Configuring Your Print Server
There are two methods for configuring the print server in a NetWare environment: the FirstGear
Administration Program based on Windows, or the PSCONFIG program based on MS-DOS. Both
programs are on the Model PS104/PS105/PS110/PS113 Print Server Resource CD that comes
with your print server.
Additionally, you can also run the QUICKSET configuration program to configure the print server
and the current Novell server in a single operation.
This chapter provides step-by-step instructions to set up the file server and the print server using
PCONSOLE and PSCONFIG programs. For detailed descriptions on the various options of
PSCONFIG, the FirstGear Administration Program, and QUICKSET, refer to
Advanced Management

Determining a Device Name for Your Print Server

The Model PS104/PS105/PS110/PS113 print server is capable of servicing multiple protocols
simultaneously. However, you must always use the same name for the print server when you are
using more than one protocol. When the print server name is changed, the print operations in all
protocols are affected; therefore, it is important that you decide on a permanent print server name
before setting up the device. Also make sure that you decide on and assign a different name for
each of the print servers on the network.

Using Your Print Server in a NetWare 3.x Network

When configuring using the PSCONFIG utility, copy all files in \DOS directory on the
Model PS104/PS105/PS110/PS113 Print Server Resource CD to the hard disk of your
workstation. The PSCONFIG program is in this directory.
Novell NetWare Printing
Tools."
Chapter 7, "Using
5-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps105Ps110Ps113

Table of Contents