Table 5-2. Rprinter Mode Printer Name Mapping - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
To associate a NetWare printer object with each printer port of the print server:
Select the print server you added in step 3.
a.
Select Print Server Configuration.
b.
Select Printer Configuration.
c.
Select the entry with printer number 0 on the Configured Printers submenu to open
d.
the Printer 0 Configuration window.
Type the predetermined print server name in the Name entry field, using the
e.
convention shown in
When referring to the table, assume that PSxxxxxx is the predetermined name of the print
server. You can provide a name different from the one presently in the print server, and
then you can change the name of the device when you execute the PSCONFIG program
for the RPRINTER setup.
The factory default name for the print server is PSxxxxxx as shown on the label on the
bottom of the device.
Table 5-2. RPRINTER Mode Printer Name Mapping
Print Server Port
Printer port 1
Printer port 2
Logical port 1
Logical port 2
Logical port 3
Logical port 4
Logical port 5
Logical port 6
Logical port 7
Logical port 8
Select the Type entry field to open the Printer Types window.
f.
Select Remote Parallel, LPT1 in the Printer Types window and press [Enter].
g.
Press [Esc].
h.
Select Yes to save the changes.
i.
5-8
Table 5-2.
Printer Name in File Server
PSxxxxxx
PSxxxxxx_P2
PSxxxxxx_L1
PSxxxxxx_L2
PSxxxxxx_L3
PSxxxxxx_L4
PSxxxxxx_L5
PSxxxxxx_L6
PSxxxxxx_L7
PSxxxxxx_L8
Novell NetWare Printing