Netware Pserver Menu Tab - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110/PS113 Print Server
Table 7-2. System Menu Tab Fields
Field Description
Device Name Choose a descriptive name for the router for identification purposes (for example,
EngPrsv). This name is used in all protocols to identify the specific print server. There is
a factory default name. For any change, NETGEAR recommends that a name be
determined before setting the print server in any network. This name should be no more
than 16 characters. Spaces are not allowed, but dashes (-) and underscore marks (_) are
accepted.
IPX/SPX Choose to enable or disable the IPX/SPX protocol used in the NetWare environment.
Protocol This selection is always shadowed to indicate that the IPX/SPX protocol is always active
and cannot be disabled.
TCP/IP Protocol Choose to enable or disable the TCP/IP protocol. TCP/IP is used for UNIX networking
and Microsoft networking. The factory default is Enable.
NetBEUI Choose to enable or disable the NetBEUI protocol. NetBEUI is primarily used in a
Protocol small-scale Microsoft networking environment.

NetWare PServer Menu Tab

The NetWare PServer menu tab sets the NetWare server (Bindery mode) or tree (NetWare
Directory Services mode) that the print server should service.
fields, and Table 7-3
7-6
describes the functions and explains how to provide information in each field.
Figure 7-4 shows the menu and its
Using Advanced Management Tools