Creating An Ndps Printer Agent; Figure D-2. Create Printer Agent Window - NETGEAR PS104 Installation And Reference Manual

Creating an NDPS Printer Agent

To create Public Access Printers using the NDPS Manager Object in NetWare Administrator,
follow these instructions. You will need to repeat the procedure for any other ports on the print
server or for any other logical printers you want to use.
To create an NDPS printer agent:
Start the NDPS Manager object you will be using to control the Printer Agent.
1.
At the Identification page, click on the Printer Agent List.
2.
Click on New to see the Create Printer Agent window, as illustrated in
3.
Figure D-2. Create Printer Agent Window
Enter the name you want for the Printer Agent (PA) Name.
4.
The NDPS Manager will be the NDPS Manager object you are using.
Select Novell Printer Gateway In the Gateway Type.
5.
Click on OK, and then select the available printer.
6.
Select Remote (LPR on IP) in the Connection Type.
7.
Click on Next to view the Configure Port Handler Screen.
8.
Using NetWare 5 NDPS
Installation and Reference for the Model PS104/PS110/PS113 Print Server
Figure D-2.
D-3