Hotstart; Antistick; Parameter Overview - EWM Taurus 301 KGE Operating Instructions Manual

Design and function
MMA welding

5.10.5 Hotstart

The hotstart device improves the ignition of the stick electrodes using an increased ignition current.
a) = Hotstart time
b) = Hotstart current
I = Welding current
t = Time

5.10.6 Antistick

5.10.7 Parameter overview

Basic parameters
Item Meaning/explanation
1 Welding current
2 Hotstart time
3 Hotstart current
4 Arcforce
The hotstart current is a percentage based on the welding current selected.
76
3 4
sec
2
sec
1
sec
Super-
puls
Anti-stick prevents the electrode from annealing.
If the electrode sticks in spite of the Arcforce device, the
machine automatically switches over to the minimum
current within about 1 second to prevent the electrode
from overheating. Check the welding current setting
and correct according to the welding task!
DYN
sec
sec
sec
Figure 5-46
Setting range
5 A to maximum welding current
0 to 20 s
0 to 200 %
-40 to 40
NOTE
sec sec
099-005033-EW501
15.01.2010