3.
The waveform is displayed upon completion of measurement. The obtained data can be checked by clicking "Zoom",
"Cursor", and other buttons.
MR Configurator2 with software version 1.110Q or later supports saving data in GX LogViewer format (JSON file) with the
graph function or drive recorder function. The file is saved with a ".json" extension by default.
I/O monitor display
The I/O signals of the servo amplifier and the on/off status of the I/O device can be displayed. The input/output status of the
signals and wiring can be checked at device startup and throughout the project creation progress.
5 MONITORING
5.2 Checking with MR Configurator2
5
213