Back Panel Connections - T+A DD 1230 R Operating Instructions Manual

DIGITAL INPUT
The three inputs for digital source devices with co-ax
digital outputs can be assigned to any picture input, or
used as independent sound inputs for source devices
which do not supply a picture.
DIGITAL INPUT
Two inputs for digital source devices with optical digital
outputs can be assigned to any picture input, or used as
independent sound inputs for source devices which do
not supply a picture.
5.1 INPUT
Input for a surround source with integral decoder.
Pin Signal
1 Front left
2 Center
3 Front right
4 Subwoofer
5 Rear left
6 Rear right
Connections
DD 1230 R
DD 1530 R
(CINCH)
(OPTICAL)
Connector pin assign-
ment
View from outside
All pins not listed are
Unused.
Pin Signal
14 Earth, front left
15 Earth, center
16 Earth, front right
17 Earth, Subwoofer
18 Earth, rear left
19 Earth, rear right
5.1 OUTPUT
Output for external loudspeakers or external power am-
plifiers.
Pin Signal
1 Front left
2 Center
3 Front right
4 Subwoofer
5 Rear left
6 Rear right
13 Trigger (+5V)
TASI
Interface for connecting the decoder to a
pre-amplifier, integrated amplifier or receiver. The inter-
face automatically switches to surround mode. In this
mode the volume and tone controls of the stereo pre-
amplifier are disabled, as these functions are now as-
sumed by the decoder.
24
Connector pin assign-
ment
View from outside
All pins not listed are
unused.
Pin Signal
14 Earth, front left
15 Earth, center
16 Earth, front right
17 Earth, Subwoofer
18 Earth, rear left
19 Earth, rear right
25 Earth, trigger
'R'-series