Variations On Standard Wiring; Optimising The System - T+A DD 1230 R Operating Instructions Manual

Special compatibility sets are available, to enable you to
combine the decoder with amplifiers and receivers from
earlier generations of
receivers of other makes, and also to use the unit in a
home cinema set-up.
To establish which compatibility set you require, please
check first whether your
a TASI interface (Cinch version: see illustration) or an
R socket.
LINK
TASI-interface
(Cinch version)
The following list provides information about the com-
patibility set you require.
1. amplifier (Cinch-version) and R
For this variant you need the compatibility set DKS 1.
2. amplifier with TASI interface (Cinch-version)
but without R socket.
LINK
For this variant you need the compatibility set DKS 2.
3. amplifier without TASI interface and without
R socket.
LINK
If you have an amplifier of this type, we recommend
that you upgrade your system by purchasing a
amplifier with TASI- and R
is possible to have certain models of
upgrade. Please ask your specialist
further details.

Variations on standard wiring

equipment, or with amplifiers /
amplifier / receiver features
-socket.
LINK
interface. However, it
LINK
amplifier
dealer for
4. The decoder in a home cinema set-up
The decoder can also be used for pure home cinema
applications without the addition of a stereo pre-
amplifier or integrated amlifier. In this case a sepa-
rate power amplifier (e.g. A 1210 or A 1520 is re-
quired for the front channels; see sketch.
For this variant you need the compatibility set DKS 3.
5. Connecting the decoder to a different make of
amplifier / receiver.
If you are using a different make of amplifier, the
decoder can be looped into the TAPE MONITOR cir-
cuit; see sketch.
For this variant you need the compatibility set DKS 4.
6. Connecting the decoder to the PD 1200 R (ana-
logue).
For this variant you need the compatibility set DKS 5.
-
Note:
Each compatibility set consists of the hardware you
require for the connections, together with instruc-
tions and information on connecting and setting up
the equipment.
42