Back Panel Connections - T+A PA 3100 HV User Manual

The PA 3100 HV features complete and consistent channel separation in the signal processing stages (double-mono
construction), and for this reason the input and output sockets are also arranged in strict symmetry relative to the centre
of the machine.
IN 1 ... IN 4
IN 5
GND
Ground terminal
60

Back panel connections

Universal pre-amplifier line inputs for connecting any stereo audio or TV equip-
ment fitted with symmetrical XLR or asymmetrical Cinch outputs.

Caution
The PA 3100 HV is equipped with symmetrical (XLR) and asymmetrical (Cinch)
sockets for inputs
must be used at any one time, i.e. the socket not in use must not be connected
to anything. Your preferred method of connection must be set in the System
Configuration menu; see chapter entitled "Basic settings of the PA 3100 HV".

In the System Configuration menu it is possible to set input IN 4 (SRND) to
separate volume control for use with surround decoders. For more information
please see the chapter entitled "Surround operation with the PA 3100 HV".
General-purpose pre-amplifier input sockets for connecting high-level signal
sources.

This input can be upgraded to form an input for an analogue turntable by fitting a
Phono MM or Phono MC module (optional accessories).
The ground lead from an analogue disc player is connected here in order to
avoid hum.
IN 1 ... IN 4
. For each input only one type of connection