Front Panel Controls - T+A DD 1230 R Operating Instructions Manual

The decoder's mains On / Off switch.
• Switching on and off
Pressing the mains button
coder on and off. When the machine is switched on
and ready to use, the green LED glows.
• Standby and record ready mode
If you hold the
second when the decoder is already switched on, the
machine switches to stand-by mode. Video recorder
recordings can be made with the unit in stand-by
mode; the screen displays the recording source you
have selected (see section 'VCR recordings using
the digital surround decoder').

Front panel controls

switches the de-
button pressed in for about one
DD 1230 R
DD 1530 R
• Switching to surround mode.
If you are in stereo mode, pressing this button briefly
switches to surround mode, and for a period of about
three seconds the screen shows the surround mode
or the sound field currently set.
• Selecting the surround mode and sound field.
If you press the
the machine displays the next surround mode or the
next sound field. When the three seconds have
elapsed, the decoder screen returns to the normal dis-
play.
If you now press the
the new surround mode or sound field for a further
three seconds; i.e. you can still continue to cycle
through the available modes.
• Switching to stereo mode.
If you hold the
one second when in surround mode, the decoder
switches back to stereo mode.
4
button again during this period,
button, the screen shows
button pressed in for about