Video Recorder (Analogue Device With Record / Playback Facilities) - T+A DD 1230 R Operating Instructions Manual

Devices with recording and playback facilities (video recorder):
Connect the components as shown in wiring diagram 8
as follows:
•
Connect the SCART socket on your video recorder to
the VCR socket on the decoder using a SCART lead.
Note:
If your video recorder does not feature a SCART
socket, use the VIDEO (Cinch) or S-VIDEO (Hosiden)
and AUDIO (Cinch) sockets on the decoder and the
video recorder.
An analogue device with recording and playback facilities (video recorder) connected to the DD 1230 R.
An analogue device with recording and playback facilities (video recorder) connected to the DD 1530 R.
•
If you also wish to use the AV device as a high-quality
stereo source, connect its analogue output to a va-
cant input on the pre-amplifier and assign the source
in the 'Source Setup'.
•
Finally connect the mains power supply and switch
the system on.
Wiring diagram 8
41