Source Setup - T+A DD 1230 R Operating Instructions Manual

In the first column of the 'Source Setups Menu' you
assign a name to every AV source device which is con-
nected to the decoder.
The device then appears on the decoder's screen under
this source device name (e.g. VCR for videorecorder)
when you select it.
In the second and third column you set the signal route
for the AV source, i.e. you define the audio or video
input socket on the decoder to which it is connected.
Name
The permitted names for AV source devices are as fol-
lows:
CD TUNER
TV AUX-1
DVD STB
5.1
1) STB
VCR
2)
3) DBR
Note:
Some AV sources feature separate video / audio outputs
for different modes of operation; see following example.

Source Setup

st
(1 column)
TAPE-1 TAPE-2
AUX-2 AUX-3
1) 2) 3)
VCR DBR
AUX-AV ---
Set-top box
Video recorder
Digital Broadcast
In the fourth column you assign a source button on the
remote control handset to the AV source device; you can
then press that button to select the source device in
surround mode.
If you do not assign a source button to the AV source
device, you can still select that device in surround mode
by pressing the
Example:
A set-top box can be used in different ways:
•
For television reception with analogue sound (picture
and sound signals via SCART cable STB ).
•
For digital radio reception (digital sound via one of
the decoder's digital inputs DIG2 ; picture signals
e.g. radio text via SCART).
To allow for this facility, it is possible to enter the same
AV source device more than once in the table, using
different names and connection configurations.
Name Video
STB STB
DBR STB
In the example above the set-top box is entered as
STB for television reception with analogue sound, and
as DBR for digital radio.
In each case the picture is then passed on via the
SCART connection STB, and the sound via STB (ana-
logue) or DIG2 (digital), depending on selected mode.
In surround mode you can select each reception mode
by means of separate source buttons (see 'Source
Setup', section entitled 'Button').
21
button repeatedly.
Audio Key
STB
DIG2 AUX2
TV