Table of Contents
Advertisement
Source Setup
Notes on wiring and assigning sources:
•
Connect the analogue stereo output of the DVD
player directly to the pre-amplifier input AUX 1.
•
Connect the picture signal to the decoder's DVD
socket using a SCART lead.
•
Connect the sound signal to the decoder's digital
input DIG 1 using a digital lead.
•
Complete the R
connections.
LINK
•
Move the switch marked R
panel of the DVD player to the AUX position.
•
Make the following settings in the 'Source Setup':
1st column:
Enter the name by which the source
device is to be displayed on the de-
coder's screen when you select it;
select DVD .
2nd column:
The picture signal from the DVD
player is passed to the decoder via
the DVD-SCART socket; set DVD .
3rd column:
The sound signal from the DVD
player is passed to the decoder via
the digital input DIG 1; set DIG 1 .
4th column:
Assign the source button AUX 1 to
the DVD player. This means that you
can select the machine in surround
mode by pressing the source button
control handset.
When you have completed the assigning process in
the 'Source Setup' as outlined above, the system
works as follows in normal daily usage:
•
In stereo mode pressing the source button
or
selects the DVD player as current stereo
source device for playing CDs.
•
A brief press on the
control handset, or the
coder, switches the system to surround mode. The
decoder input DVD becomes the current listening
and viewing source for surround mode. You can
now play a DVD in surround mode.
(Example: Integrating a DVD 1210 R)
ADDR on the back
LINK
or
on the remote
button on the remote
button on the de-
Source selection
-
If you repeatedly press the
remote control handset (or the
the front panel), you can select all the decoder's
inputs in turn. In each case the name of the
source device is displayed on the screen.
-
Pressing the remote control source button
or
selects the DVD player directly, and
the source device name 'DVD' appears on the
screen.
•
If you wish to switch the system back to stereo mode,
briefly press the
handset, or hold the
pressed in for about one second.
23
button on the
button on
button on the remote control
button on the decoder
Advertisement
Table of Contents
