CyberData 010878 Operation Manual page 3

Revision History
Revision
A
B
C
D
E
F
G
CyberData Corporation
Date Released Description of Changes
3/01/2007 This is the first release of this manual
4/13/2007 Changes the Authenticate ID and password character limit from 30 to
25 in Table 2-4, "SIP Setup
6/12/2007 Removes step "Select Partition 1 or Partition 2 for the Kernel and the
Application" in
3/10/2008 Adds information about the Multicast TTL in
the VoIP Paging Server (Table 2-5, "PGROUPS Setup
and Chapter C, "How to Use the Multicast
1/22/2009 Firmware updated to version 1.2.0. which adds a feature to bypass the
DTMF entry. If the DTMF is bypassed, the Paging Server will relay
audio to Paging Group 00.
Updates
Updates
Adds Note about where to obtain the latest firmware in
"Upgrading the
Firmware: This revision provides information for firmware version
1.2.0. Release notes detailing the difference between this firmware
version and earlier firmware versions is available in the firmware zip
file at the following URL:
http://www.cyberdata.net/support/voip/index.html
5/16/2011 Updates
and Baud
Updates
Required".
Updates
11/06/2012 Updates
Required".
930132F
Parameters".
Section 2.8, "Rebooting the Paging
Figure 2-10, "PGROUPS Setup"
Table 2-5, "PGROUPS Setup Parameters"
Firmware".
Section 2.3.3.1, "Confirm Power on, Network Connectivity,
Rate".
Section 2.3.4, "Restore the Factory Default Settings as
Figure 2-4, "Paging Server Indicator
Section 2.3.4, "Restore the Factory Default Settings as
Server".
Chapter 2, "Implementing
Parameters")
Extensions.
Section 2.7,
Lights".
Operations Guide