CyberData 010878 Operation Manual page 25

To upload a firmware file, log in as instructed in
Table 2-6
Web Page Item
System Configuration
Bootname
Kernel
Application
TFTP Server IP address
New Filename
1. On the Home page, click Upgrade Firmware to open the Firmware Upgrade page.
2. Enter the TFTP Server IP address.
3. Enter the Kernel or Application New Filename for the firmware file you are uploading.
Note
4. Select the Partition to which the firmware is uploaded.
5. Click Upload File to automatically upload the selected firmware, and reboot your system.
VoIP Paging Server Operations Guide
shows the web page items on the Firmware Upgrade page.
Table 2-6. Firmware Upgrade Parameters
You can obtain the latest Paging Server firmware from the CyberData website:
http://www.cyberdata.net/products/voip/digitalanalog/pagingserver/downloads.html
930132F
Implementing the VoIP Paging Server
Section 2.4.2, "Log in to the Configuration
Description
Shows the current configuration.
Shows the current boot loader filename.
Shows the current kernel filename for partition 1 and 2.
Shows the current application filename for partition 1
and 2.
Enter the TFTP Server IP address.
Use this field to enter the new file name for the kernel or
application firmware file that you are uploading.
Click on this button to automatically upload the selected
firmware and reboot the system.
Link to the Network Setup web page.
Link to the Admin Settings web page.
Link to the SIP Setup web page.
Link to the Home page.
Click on this button to reboot the system.
Upgrading the Firmware
GUI".
CyberData Corporation
21