Configure The Sip Parameters - CyberData 010878 Operation Manual

Web Page Item
To change the default Web access Username and Password:
1. Enter the new Username from four to 25 alphanumeric characters in the Change Username
field. The Username is case-sensitive.
2. Enter the new Password from four to 20 alphanumeric characters in the Change Password field.
The Password is case-sensitive.
3. Enter the new password again in the Re-enter New Password field.
4. Click Save Settings.

2.4.5 Configure the SiP Parameters

The SIP parameters enable the Paging Server to contact and register with the SIP server. On the
Home page, click SIP Setup to open the SIP Configuration page.
VoIP Paging Server Operations Guide
Table 2-3. Administrator Settings Parameters
Description
Link to the Upgrade Firmware web page.
Link to the Home page.
930132F
Implementing the VoIP Paging Server
Configuring the Paging Server
CyberData Corporation
14