Set Up The - CyberData 010878 Operation Manual

2.5 Set up the PGROUPS
Note
1. Click on the PGROUPS Setup button to open the PGROUPS Setup page. See
VoIP Paging Server Operations Guide
A PGROUP is a way of assigning multicast addresses and port numbers when configuring
multicast paging speakers.
To assign a multicast address, you must first configure the CD VoIP speakers that you want
to put into a paging zone by entering a particular multicast address and port number
combination in the web configuration for these speakers.
Other PGROUPS pages (1-100)
Figure 2-10. PGROUPS Setup
930132F
Implementing the VoIP Paging Server
Set up the PGROUPS
Figure 2-10.
CyberData Corporation
17