Table of Contents
Advertisement
Connecting the Base Station
Replacing the Battery Pack
1.
Using a coin or screwdriver, unscrew the captive screw
located on the bottom of the scanner handle until the
battery pack is disengaged.
The battery pack will rise slightly in the rear, pushed by
the contact springs.
2.
Extract the battery pack by slightly rotating the pack
and pulling away from the reader.
To mount the new battery pack reverse the process:
1.
Insert the top of the new pack inside the reader's han-
dle.
2.
Rotate the battery pack downward while pressing the
bottom side of the battery pack (to seat securely into
the contacts springs) so that the edges of the pack and
the handle board are aligned, while re-tightening the
screw in the bottom of the handle.
8
QuickScan™ QM21X1
Advertisement
Table of Contents
