Replacing The Battery Pack - Datalogic QuickScan BC2030 Quick Reference Manual

General purpose handheld area imager bar code reader with bluetooth wireless technology
Table of Contents

Advertisement

CAUTION
The useful life of LI batteries depends on usage and number
of charges, etc., after which they should be removed from ser-
vice, especially in mission critical applications. Do not con-
tinue to use a battery showing excessive loss of capacity, it
should be properly recycled / disposed of and replaced.
Collect and recycle waste batteries separately from the device
to comply with European Directive 2006/66/EC, 2011/65/EU,
2002/96/EC, 2012/19/EU and subsequent modifications, US
and China regulatory and other laws and regulations about
the environment.

Replacing the Battery Pack

1.
Using a coin or screwdriver, unscrew the bottom of the
battery pack until it is disengaged.
The battery pack will rise slightly in the rear, pushed by
the contact springs.
Quick Reference Guide
Only in case of long storage, to avoid deep dis-
charge of the battery it is recommended to par-
tially recharge the battery every three months to
keep the charge status at a medium level.
As a reference, run a fast recharge for 20 minutes
every three months on unused products to avoid
any performance deterioration of the cell.
Before proceeding, read "Battery Safety" on
the preceding pages. Datalogic recommends
annual replacement of rechargeable battery
packs to ensure maximum performance.
Connecting the Base Station
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents