Table of Contents
Advertisement
FusionServer Pro 2288X V5 Server
User Guide
Procedure
Step 1 Configure an IP address for the client (PC) to enable communication between the
client and the iBMC.
The IP address configured and the iBMC management network port IP address
must be on the same network segment.
Step 2 Open the console and set the folder where the IRC is stored as the working folder.
Step 3 Run the chmod 777 KVM.sh command to set the permission for the Independent
Remote Console.
Step 4 Open the Independent Remote Console.
./KVM.sh
The Connect to iBMC dialog box is displayed.
Figure 9-11 Connect to iBMC
Step 5 Enter the network address, user name, and password.
Step 6 Select a login mode.
●
●
Step 7 Click Connect.
A security warning is displayed.
Issue 04 (2020-06-05)
● The network address can be in any of the following formats:
–
iBMC management network port IP address (IPv4 or IPv6 address):Port number
Enter an IPv6 address in brackets or an IPv4 address directly, for example,
[2001::64]:444 or 192.168.100.1:444.
–
iBMC domain name address:Port number
● When the port number is the default port number 443, the port number can be left
blank.
Shared Mode: allows two users to access and manage a server at the same
time. Each user can view the operations performed by the other user.
Private Mode: allows only one user to access and manage a server at a time.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
126
Advertisement
Table of Contents
