FusionServer Pro 2288X V5 Server
User Guide
Procedure
Step 1 Install the server.
At least two people are required to move the device. Otherwise, personal injury or
device damage may occur.
1.
2.
Figure 7-8 Installing the server
Step 2 Connect the power cables to the PSUs.
For details, see
Step 3 Connect a network cable, a VGA cable, and USB devices as required.
Step 4 Power on the server.
For details, see
Step 5 Check indicator status.
For details, see
----End
Issue 04 (2020-06-05)
NO TICE
Lift the server, place it on guide rails, and slide it into the chassis. At least two
people are required to move the server. See (1) in
Align the mounting ears on both sides of the server with the mounting bars
and tighten the captive screws on the mounting ears. See (2) in
7.2.6.7 Connecting PSU
7.3.1 Power-On
2.1.2 Indicators and
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
Cables.
Procedure.
Buttons.
Figure
7-8.
Figure
7-8.
78