Lauda Integral T 1200 Operating Instructions Manual page 10

Classification in accordance with EMC requirements of DIN EN 61326-1
Device
Process thermostat
Integral T
single-phase and
triple-phase
devices
Process thermostat
Integral T
single-phase and
triple-phase
devices
Instructions for Class A digital device, USA:
"Note: This equipment has been tested and found to comply with the limits for Class A digital device,
pursuant to Part 15 of the FCC (Federal Communication Commission) Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his
own expense".
Instructions for Class A digital device, Canada:
"This Class A digital apparatus complies with Canadian ICES-003" (ICES = Interference Causing
Equipment Standards).
« Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada ».
Applicable only to water-cooled devices:
 Danger of corrosion of the cooling water circuit due to water of unsuitable quality ( 6.4).
 Secure the return hose of the water cooling in the discharge area in order to prevent the hose
sliding off uncontrollably, also during pressure surges.
 Secure the return hose of the water cooling in the discharge area so that it is not possible of hot
cooling water to splash out.
 Avoid kinking or crushing the return hose of the water cooling. Excessive pressure can cause the
cooling water hoses to tear and hot water to escape.
 To avoid damage due to a leak in the cooling water system we recommend the use of a water leak-
age sensor with water cut-off.
10
Immunity
Type 2 in Emissions Class B
accordance with in accordance with
DIN EN 61326-1
Type 2 in Emissions Class B
accordance with in accordance with
DIN EN 61326-1
Safety notes
Integral T process thermostats
Emissions class
CISPR 11
CISPR 11
Customer power supply
Only for EU
Domestic connection value
≥ 100 A
Worldwide (outside EU)
No limitation
YAWE 0026 / 21/01/2019