Pressure Indication; Menu - Lauda Integral T 1200 Operating Instructions Manual

Connection of the external Pt100 to Lemo socket 10S:
Pin
1 +
2 +
3
4
 4-pin Lemosa plug for Pt100 connection (Cat. No. EQS 022).
 Use screened connecting cable. Connect screen to connector case.
7.5.3

Pressure indication

7.5.4

Menu . .

36
I Current path
U Voltage path
- U Voltage path
- I Current path
Integral T process thermostats
 When external Pt100 is not connected.
 Line 2 indicates the pump pressure which establishes
itself through the flow resistance in the external circuit.
 This indication is also required for adjusting and
monitoring the bypass.
 The actual pump flow rate can be deduced from the
pump characteristic.
 Scroll to level 1.
Starting up
Pt100
DIN EN 60751
YAWE 0026 / 21/01/2019