Interfaces - Lauda Integral T 1200 Operating Instructions Manual

4.8

Interfaces

Connectors for standby contact input, fault (alarm) contact output, analogue inputs and outputs,
external Pt100 and serial RS 232/RS 485 interfaces are accessible from below after swinging out the
control unit. The control unit can be folded out to Position 2 in order to connect the sockets and then
be folded back to Position 1.
Standby
16N
Plug
EQS 048
For additional description of the interfaces see under Section 7.7 and Section 7.
18
Position 1
Alarm OUT RS 232/485
12N
Socket
EQD 047 EQM 042
Plug housing
EQG 026
Equipment description
Integral T process thermostats
Pt100
65S 10S
Plug Plug
EQS 022
Position 2
Standard signal
66S
Plug
EQS 057
YAWE 0026 / 21/01/2019