AUMA SA 07.2 Operation Manual page 72

Commissioning (basic settings)
72
SA 07.2 SA 16.2 / SAR 07.2
2. Switch on actuator in direction CLOSE and observe the direction of rotation on
the mechanical position indication:
For self-adjusting mechanical position indication:
The direction of rotation is correct if the actuator operates in direction
CLOSE and arrow
Figure 71: Direction of rotation
For mechanical position indication via indicator mark: (not self-adjust-
ing)
The direction of rotation is correct if the actuator operation in direction
CLOSE and the symbols ( / ) turn counterclockwise:
Figure 72: Direction of rotation
SAR 16.2 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive DeviceNet
turns clockwise in direction CLOSE (symbol
(for "clockwise closing" version")
/ (for "clockwise closing version")
).