Magneto Rotor And Stator Coil Assembly Installation - Yamaha EF2800i Service Manual

1
2
SVU3450
1
GENERATOR
4. Remove:
• Magneto rotor 1
NOTE:
• Remove the magneto rotor 1 together with
the stator coil assembly using the magneto
rotor puller 2.
• Fully tighten the tool holding bolts, making
sure the tool body is parallel with the mag-
neto rotor. If necessary, one screw may be
backed out slightly to level the tool body.
CAUTION:
The magnetic force of the magneto rotor is
very strong. Therefore, do not change the
position of the magneto rotor and stator
coil assembly during or after removal, oth-
erwise they may be damaged.
Rotor puller:
MAGNETO ROTOR AND STATOR COIL
ASSEMBLY INSTALLATION
1. Install:
• Woodruff key 1
CAUTION:
Be sure to remove any oil or grease from
the tapered portion of the magneto rotor
using a cloth dampened with thinner.
SVU3460
2. Install:
• Magneto rotor
• Stator coil assembly
• Washer
• Magneto rotor nut
3-26
ENG
YU-33270, 90890-01362