Place Ticket - Rational iCombi Pro Series Operating Instructions Manual

10 | iProductionManager
iCookingSuite and programming mode
1. To send an intelligent cooking path from the iCookingSuite to the iProductionManager, press the button in the
menu bar:
2. Press the button underneath the desired cooking path:
3. Press the button
4. To send a cooking path from the programming mode to the iProductionManager, press the button in the
menu bar:
5. Press the button underneath the desired cooking path:
6. Press the button
7. Press the button in the menu bar:
8. Press the button
>
The intelligent cooking paths are displayed in the ticket board. You can now place the ticket [} 56].
10.4

Place ticket

a
You have created manual programme [} 52], shopping cart [} 53] or a programme board [} 55].
1. Drag a ticket to the desired shelf level.
>
For better orientation, the shelf level where you want to place the ticket is highlighted in blue. As a further
help, the time is shown on the ticket.
>
If the shelf level is marked in yellow or red, you cannot place the ticket without moving the already placed
tickets. Click here for more information: Combination check [} 57] and locating logic [} 57]
2. If you have placed several tickets, review the time axis to get an overview. To do this, press this button:
The following options are available to optimise the placement of tickets:
Close planning gaps [} 57]
n
Time optimisation [} 58]
n
Energy optimisation [} 59]
n
Target time cooking [} 60]
n
If you place tickets at the actual time, a vertical yellow or blue bar appears:
A yellow bar indicates that the cooking chamber is heating up.
n
A blue bar indicates that the cooking chamber is cooling down using the cool-down function.
n
The width of the bar indicates how long it takes to heat up or cool down.
n
56 / 112 Operating instructions