TalkAnytime Quick Start Instructions
Phone/IP Details *Absolutely Needed*
Before Starting the Installation
The TalkAnytime will interface with both the IP network and the phone system. You must gather
information about the IP network and about the phone system so that the TalkAnytime can be configured
to operate with them properly. A summary of this configuration information appears on page 18 ("Config
Info CheckList").
Gather IP Information
Ask your computer network
administrator.
• IP Address
• IP Mask
• Gateway
• Domain Name Server (DNS) Info (optional)
• Determine whether or not 802.1p Packet Prioritization
will be used.
Phone/IP Details *Absolutely Needed*
Gather Telephone Information
Analog Phone Parameters
Ask phone company or
telecom manager.
• Which interface type is used?
_____
E&M
• If FXS, determine whether the line will be used for a
phone, fax, or KTS (key telephone system)
• If FXO, determine if line will be an analog PBX
extension or an analog line from a telco central office
• If E&M, determine these aspects of the E&M trunk
line from the PBX:
• What is its Type (1, 2, 3, 4, or 5)?
• Is it 2-wire or 4-wire?
• Is it Dial-Tone or Wink?
Multi-Tech Systems, Inc.
IP Network Parameters:
Record for this
TalkAnytime unit.
Analog Telephony Interface Parameters:
Record for this VOIP Site
_____
FXS/FXO
TalkAnyTime User Guide
Gathering Phone/IP Details
17