Local Configuration Procedure (Detailed)
You can begin the configuration process as a continuation of the TalkAnytime software installation. You
can establish your configuration or modify it at any time by launching the TalkAnytime program from the
Windows Start menu.
1. Check Power and Cabling. Be sure the TalkAnytime unit is turned on and connected to the computer
via the TalkAnytime unit's Command Port (DB9 connector at computer's COM port; RJ45 connector at
the TalkAnytime unit).
2. Start TalkAnytime Configuration Program. Launch the TalkAnytime program from the Windows Start
menu (from the folder location determined during installation).
Multi-Tech Systems, Inc.
TalkAnyTime User Guide
Chapter 5: Technical Configuration
64