Table of Contents
Advertisement
8. Then a completion screen entitled IFM Test will appear.
Click OK.
9. The TalkAnytime will reboot itself. When the reboot is complete, the TalkAnytime Configuration screen
will close.
10. The IFM firmware downloading process is complete.
Setting and Downloading User Defaults
The Download User Defaults command allows you to maintain a known working configuration that is specific
to your VOIP system. You can then experiment with alterations or improvements to the configurations confident
that a working configuration can be restored if necessary.
1. Before you can invoke the Download User Defaults command, you must first save a set of configuration
parameters by using the Save Setup command in the sidebar menu of the TalkAnytime software.
2. Before the setup configuration is saved, you will be prompted to save the setup as the User Default
Configuration. Select the checkbox and click OK.
A user default file will be created. The TalkAnytime unit will reboot itself.
Multi-Tech Systems, Inc.
Save Current Setup as User Default Configuration
MultiVOIP _____ will be brought down.
OK
Cancel
TalkAnyTime User Guide
Chapter 7: Operation and Maintenance
Help
158
Advertisement
Table of Contents
