Table of Contents
Advertisement
Field Name
Enable
Console
Messages
Filters (button)
Turn Off Logs
Logs Buttons
GUI
SMTP
SysLog Server
Enable
IP Address
Port
Online Statistics
Updation
Interval
Multi-Tech Systems, Inc.
"Logs" Screen Definitions
Values
Description
Y/N
Allows TalkAnytime debugging messages to be read via a basic terminal
program like HyperTerminal ™ or equivalent. Normally, this should be
disabled because it uses TalkAnytime processing resources. Console messages
are meant for tech support personnel.
Click to access secondary screen on where console messages can be
included/excluded by category and on a per-channel basis. (See the Console
Messages Filter Settings screen on subsequent page.)
Y/N
Check to disable log-reporting function.
Only one of two log reporting methods, GUI or SMTP, may be chosen.
Y/N
User must view logs at the TalkAnytime configuration program.
Y/N
Log messages will be sent to user-specified email address.
Y/N
This box must be checked if logging is to be done in conjunction with a SysLog
Server program. For more on SysLog Server, see Operation & Maintenance
chapter.
n.n.n.n
IP address of computer, connected to TalkAnytime network, on which SysLog
for n=
Server program is running.
0-255
514
Logical port for SysLog Server. 514 is commonly used.
integer
Set the interval (in seconds) at which logging information will be updated.
TalkAnyTime User Guide
Chapter 5: Technical Configuration
102
Advertisement
Table of Contents
