Table of Contents
Advertisement
DTMF/Other Details
Field Name
Prefix Matched
Outbound Digits
Sent
Outbound Digits
Received
Server Details
DTMF Capability
Supplementary Services Status
Call Status fields
Call Status
Call Control
Status
Silence
Compression
Forward Error
Correction
Multi-Tech Systems, Inc.
Call Progress Details: Field Definitions (cont'd)
Values
specified dialing
Displays the dialed digits that were matched to a phonebook entry.
digits
0-9, #, *
The digits transmitted by the
this call.
0-9, #, *
Of the digits transmitted by the
this call, these are the digits that were confirmed as being received.
n.n.n.n
The IP address (etc.) of the traffic control server (if any) being used
(for n=0-255)
(whether an H.323 gatekeeper, a SIP proxy, or an SPP registrar
and/or other
gateway) will be displayed here if the call is handled through that
server IP-related
server. Not applicable for TalkAnytime units.
descriptions
inband,
Indicates whether the DTMF dialing digits are carried "Inband" or
out of band
"Out of Band." The corresponding field values differ for the 3
different voip protocols.
Expressions differ
For H.323, this field can display "Out of Band" or "Inband". For SIP
slightly for
different Call
it can display either "Out of Band RFC2833" or "Out of Band SIP
Signaling
INFO" to indicate the out-of-band condition or "Inband" to indicate
protocols (H.323,
the in-band condition. For SPP it can display "Out of Band
SIP, or SPP).
RFC2833" or "Inband".
These fields are not applicable to TalkAnytime.
hangup, active
Shows condition of current call.
Tun, FS + Tun,
Displays the H.323 version 4 features in use for the selected call.
AE, Mux
These include tunneling (Tun), Fast Start with tunneling (FS +
Tun), Annex E multiplexed UDP call signaling transport (AE), and
Q.931 Multiplexing (Mux). See Phonebook Configuration
Parameters (in T1 or E1 chapters) for more on H.323v4 features.
SC
"SC" stands for Silence Compression. With Silence Compression
enabled, the MultiVOIP will not transmit voice packets when
silence is detected, thereby reducing the amount of network
bandwidth that is being used by the voice channel.
FEC
"FEC" stands for Forward Error Correction.
Correction
or lost to be recovered. FEC adds an additional 50% overhead to
the total network bandwidth consumed by the voice channel.
Default = Off
TalkAnyTime User Guide
Chapter 7: Operation and Maintenance
Description
TalkAnytime
TalkAnytime
enables some of the voice packets that were corrupted
to the PBX/telco for
to the PBX/telco for
Forward Error
135
Advertisement
Table of Contents
