Sf 400/800 Cabling; Establishing Tcp/Ip Communication - Multitech MultiModem SF 100-G User Manual

SF 400/800 Cabling

1. Turn the power off on the PCs and the MultiModem iSMS.
2. Plug one end of a RJ-45 cable into the ETHERNET port on the MultiModem iSMS and the other end
into the Ethernet port on a network-connected PC.
3. Connect the provided power supply cable to the power port on the back of the MultiModem iSMS,
and plug the other end into an AC power outlet.
4. Attach the cellular antennas.
•
Be sure to locate this appliance where there is wireless coverage.
•
The antenna must be attached in order for the MultiModem iSMS to be operational.
•
Maintain a separation distance of at least 20 cm (8 inches) between the transmitter's antennas
and the body of the user or nearby persons. The product is not designed for, nor intended to be,
used in applications within 20 cm (8 inches) of the body of the user.

Establishing TCP/IP Communication

The following directions establish a TCP/IP connection at the workstation so the PC can communicate with the
MultiModem iSMS. The following directions were written using Windows 2000 and XP operating systems.
Setting a Fixed IP Address
1. Make the MultiModem iSMS connections as described on the previous two pages
2. Click Start | Settings | Control Panel. Double-click the Network Connections icon.
3. The Network Connections screen displays. .
Right-click the Local Area Connection icon and choose Properties from the drop down list.
Multi-Tech Systems, Inc. MultiModem® iSMS User Guide for Administrators
Chapter 2 – Getting Started
15