Table of Contents
Advertisement
The Voice/FAX Parameters fields are described in the tables below.
Field Name
Default
Select
Channel
Copy
Channel
Voice Gain
Input Gain
Output Gain
DTMF Parameters
DTMF Gain
DTMF Gain,
High Tones
DTMF Gain,
Low Tones
Field Name
DTMF Parameters
DTMF
In/Out of
Band
FAX Parameters
Multi-Tech Systems, Inc.
Voice/Fax Parameter Definitions
Values
Description
--
When this button is clicked, all Voice/FAX parameters are set to their
default values.
Channel to be configured is selected here.
1-4 (410)
1-8 (810)
--
Copies the Voice/FAX attributes of one channel to another channel.
Attributes can be copied to multiple channels or all channels at once.
--
Signal amplification (or attenuation) in dB.
+31dB
Modifies audio level entering voice channel before it is sent over the
to
network to the remote VOIP. The default & recommended value is 0
–31dB
dB.
+31dB
Modifies audio level being output to the device attached to the voice
to
channel. The default and recommended value is 0 dB.
–31dB
--
The DTMF Gain (Dual Tone Multi-Frequency) controls the volume
level of the DTMF tones sent out for Touch-Tone dialing.
+3dB to
Default value: -4 dB. Not to be changed except under supervision of
-31dB &
MultiTech's Technical Support.
"mute"
+3dB to
Default value: -7 dB. Not to be changed except under supervision of
-31dB &
MultiTech's Technical Support.
"mute"
Voice/Fax Parameter Definitions (cont'd)
Values
Description
Out of
, When DTMF is set to Inband, the DTMF digits are passed through the
Band, or
TalkAnytime unit as they are received. In MultiVOIP products, which are
Inband
related to the TalkAnytime unit, DTMF can also be set to Out of Band. In
such cases, the TalkAnytime unit detects DTMF tones at its input and
regenerates them at its output.
Not applicable to TalkAnytime.
TalkAnyTime User Guide
Chapter 5: Technical Configuration
75
Advertisement
Table of Contents
