SSANGYONG Rexton 2004 Service Manual page 1054

HEATER AND BLOWER MODULE
ASSEMBLY
Removal and Installation
Front Hoses
1. Remove the high and low pressure air conditioner pipes.
1-1. Discharge the refrigerant.
1-2. Unscrew the bolts for high and low pressure pipes.
Installation Notice
Tightening torque
2. Remove the heater hoses.
2-1. Drain the coolant.
2-2. Remove the clip and push the inlet hose clamp around
the fire wall rearward.
2-3. Loosen the hose and tube connections.
2-4. Remove the hose from the tube.
2-5. Remove the clip and push the heater inlet hose rearward.
2-6. Remove the heater inlet and outlet hoses.
2-7. Install in the reverse order of removal.
HEATER & VENTILATION SYSTEM
REXTON SM - 2004.4
10 ± 1.0 Nm
10B-27
Y220_10B030
Y220_10B031
Y220_10B032
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN