Specifications - SSANGYONG Rexton 2004 Service Manual

11A-4

SPECIFICATIONS

Description
Hood Type
Front door Structure
Regulator type
Locking device
Rear door Structure
Regulator type
Locking device
Tailgate Type
Windshield
Thickness of
glasses
Front door
Rear door
Side quarter glass
Tailgate
Nozzle type
Requirements of
leak tester stand
Nozzle height
Displacement
Pressure
Location of test stand for windshield
and A-pillar
Location of test stand for B-pillar
Location of test stand for tailgate
and rear deck lid
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Fixed type
Open type
Full-zet spray nozzle #1/2 GG-25 or nozzle with 60° angle
Specification
Gas lifter type
Frame door
Wire-Drum type
Pin-Fork device
Frame door
Wire-Drum type
Pin-Fork device
Gas lifter type
5 mm
4.0 mm
4.0 mm
4.0 mm
4.0 mm
5.0 mm
1,600 mm from ground
14 liter per minute
155 kPa (22.5 psi): at nozzle
From windshield corner center line:
- downward: approx. 30° - rearward: approx 45°
From rear door center line:
- downward: approx. 30° - rearward: approx 45°
At 60 mm from rear door corner:
- downward: approx. 30° - rearward: approx 45°
BODY
REXTON SM - 2004.4