SSANGYONG Rexton 2004 Service Manual page 968

MAINTENANCE AND ADJUSTMENT
HEADLAMP AIMING
An approved beam setting device should be used for a correct headlamp aiming.
Make sure to follow the operating instructions provided by the manufacturer.
Headlamp aiming requirements: parking on a flat surface specified tire pressure, one passenger (driver, 65 kg), spare
tire loaded, OVM tools loaded (unlade all other loads)
If not available to use the beam setting device, adjust the headlamp aiming with a screen.
When Using a Beam Setting Device
1. Arrange the vehicle and beam setting device according
to the operating instructions provided by the manufacturer.
2. Adjust the headlamp aiming by turning the direction
control lever with a screwdriver.
LAMPS
REXTON SM - 2004.4
9G-5
Y220_09G327
Y220_09G328
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN