SSANGYONG Rexton 2004 Service Manual page 1272

7. Install the tailgate glass with a compressor within 5
minutes after applying the glass adhesive.
• Put the adhesive tapes at the tailgate, the upper
corners (2 locations) and the arm side after installing
the tailgate glass.
8. Attach the tape to the tailgate glass and the tailgate
glass frame.
9. Let the adhesive dry for 24 hours.
10. Remove the tape (a).
11. Check for waterleaks by pouring water on the tailgate
glass. If a leak is found, dry the tailgate glass and fill the
area that leaks with adhesive. If the leak persists, remove
the tailgate and repeat the entire procedure.
12. Connect the rear defogger connector.
13. Connect the negative battery cable.
EXTERIOR
REXTON SM - 2004.4
Guide hole
Tailgate
panel
11C-63
Guide pin
Dual-lock
Y220_11C155
Y220_11C156
Y220_11C157
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN