9G-6
Allowable focusing area
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Y220_09G329
Center line of vehicle
Vertical line of headlamp bulb
Horizontal line of
headlamp bulb
Horizontal line of
headlamp focus
Y220_09G330
Y220_09G331
Y220_09G332
When Using a Screen (unit: mm)
1. Install the screen (2 m x 1.5 m) in front of the headlamps
by 3 meters and align the center lines of the vehicle and
the screen.
2. Align the horizontal line through the headlamp center
and the center line of the screen.
3. Run the engine with approx. 2,000 rpm and turn on the
headlamp. At this moment, the focus of the headlamp
should aim the "A" point.
4. If the focus deviates the "A" point, adjust the headlamp
aiming by turning the direction control lever with a
screwdriver.
LAMPS
REXTON SM - 2004.4