Side Molding/Wheelhouse Molding - SSANGYONG Rexton 2004 Service Manual

11C-26
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Side Molding/Wheelhouse Molding

1. Unscrew the front and rear mounting screws and remove
the wheel house molding.
Y220_11C053
2. Remove the front and rear door moldings with a special
tool.
Notice
Be careful not to damage the painted surface of body
and moldings when removing the moldings.
Y220_11C054
3. Install in the reverse order of removal.
Notice
Make sure to avoid irregularities and gaps when
installing the moldings.
EXTERIOR
REXTON SM - 2004.4