SSANGYONG Rexton 2004 Service Manual page 1231

11C-22
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
5. Remove the mounting bolts from the mud guard.
6. Open the door and remove the fender mounting bolt.
Y220_11C042
7. Remove the bumper fascia bolts.
Y220_11C043
8. Unscrew the rear hood hinge bolt and upper fender bolts
and remove the fender.
Y220_11C044
9. Install in the reverse order of removal.
Cautions during installation
1) Paint the inside of fender and fender installation surface.
2) Put the fender on the installation surface and
temporarily tighten the front and rear hood bolts.
Adjust the clearance and steps between door, hood
and lamp.
3) Apply the waterproof paint on the bolt connections
and tighten them with the specified torque.
Tightening torque
4) After painting, check the electric devices for
connection and operation.
Y220_11C045
6.9 ~ 8.8 Nm
EXTERIOR
REXTON SM - 2004.4