Tailgate - SSANGYONG Rexton 2004 Service Manual

Tailgate

1. Remove the grommets and disconnect the connectors.
Disengage the washer fluid hose.
2. Spread out the clips (4 locations) with a proper tool and
remove the gas lifters at both sides.
3. Unscrew the nuts and remove the tailgate with the interior
headlining removed.
Notice
Let a person support the tailgate not to drop the
tailgate down.
4. Install in the reverse order of removal.
Notice
The gas lifter is filled with the high pressurized
nitrogen and oil. Make sure to remove the pressure
before disposal.
Fully extend the gas lifter and put it on a level surface.
Drill out a hole of 2 to 3 mm diameter to remove the
pressurized gas and oil.
EXTERIOR
REXTON SM - 2004.4
11C-41
Y220_11C089
Y220_11C090
Y220_11C091
Y220_11C092
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN