Front Door Glass - SSANGYONG Rexton 2004 Service Manual

11C-48
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Front Door Glass

Preceding work: Removal of door trim
1. Remove the door trim assembly and seal.
Y220_11C111
2. Remove the front door glass.
1) Unscrew the glass mounting screws while the
regulator carrier plate is at its location.
2) Remove the glass
Installation Notice
Tightening torque
Notice
Make sure that the glass doesn't contact to the vehicle
body. It may cause to damage the painted surface.
Y220_11C112
3. Install in the reverse order of removal.
Notice
Apply a small amount of soapy water to the contacting
point of glass run and the glass with a brush to make
the installation easier.
3 Nm
EXTERIOR
REXTON SM - 2004.4