4.5.2 Repair procedures
To remove the front panel motor
To install the front panel motor
RXTM-R+RXTP-R+ARXTP-R+RXTA-B+FTXTA30B2V1B(W)
(B)+FTXTM30+40R2V1B+FTXTP25+35M5V1B+ATXTP25+35M5V1B
R32 Optimized Heating 4 Split
ESIE21-12A – 2022.02
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
1 On the front grille (removed from the indoor unit), remove the 2 screws and
remove the front panel motor and gears assembly from the front grille.
2 Remove the 2 screws and remove the front panel motor from the bracket.
b
a Screw (front panel motor and gears ass)
b Front panel motor and gears assy
c Screw (front panel motor)
d Front panel motor
3 To install the front panel motor, see
1 Install the front panel motor on the bracket and tighten using the 2 screws.
CAUTION
Make sure the motor axle is well aligned with the slot in the gear when installing the
motor.
b
a Screw (front panel motor and gears ass)
b Front panel motor and gears assy
c Screw (front panel motor)
d Front panel motor
2 Install the front panel motor and gears assembly in the correct location on the
front grille.
3 Install and tighten the 2 screws to fix the front panel motor and gears
assembly.
a
a
d
c
c
"4.5.2 Repair
a
a
d
c
c
4
Components
|
4
"4.17 Plate
work" [
144].
4
procedures" [
81].
Service manual
81