Daikin RXTA30B2V1B Service Manual page 63

To install the compressor insulation
To remove the compressor
RXTM-R+RXTP-R+ARXTP-R+RXTA-B+FTXTA30B2V1B(W)
(B)+FTXTM30+40R2V1B+FTXTP25+35M5V1B+ATXTP25+35M5V1B
R32 Optimized Heating 4 Split
ESIE21-12A – 2022.02
b
a String
b Body jacket (outer)
c Top insulation
d Secondary (inner) body jacket
2 Open the body jacket.
3 Remove the top insulation from the compressor.
4 Open the secondary body jacket from the compressor.
5 Remove the body jackets from the compressor.
6 To install the compressor insulation, see
1 Install the secondary (inner) body jacket on the compressor.
2 Install the top insulation on the compressor.
b
a String
b Body jacket (outer)
c Top insulation
d Secondary (inner) body jacket
3 Install the (outer) body jacket around the compressor.
4 Properly fit the top insulation in the body jacket.
5 Attach all strings to secure the body jacket.
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
Prerequisite: Remove the compressor insulation.
a c
"4.2.2 Repair
a c
4 Components
|
d
4
procedures" [ 62].
d
4
"4.17 Plate work" [ 144].
Service manual
63