Daikin RXTA30B2V1B Service Manual page 182

4 | Components
To install the swing flap motor gearcase assembly
Service manual
182
b
c
a Fan guard
b Rocker arm
c Swing raster
5 Remove the main swing flap motor, see
6 Remove the 3 screws from the swing flap motor gear case assembly. Do NOT
yet remove the assembly from the indoor unit.
a
a Screw
b Swing flap motor gearcase assembly
7 Cut all tie straps that fix the wiring harness (harness to main and secondary
swing flap motor and swing raster motor).
8 Route the wiring harness out of the harness retainers.
9 Disconnect the rocker arm from the swing raster.
10 Remove the swing flap motor gear case assembly from the indoor unit.
11 To install the swing flap motor gearcase assembly, see
4
procedures" [ 181].
1 Install the swing flap motor gearcase assembly on the indoor unit. Install the 3
screws, but do NOT yet tighten them.
a
"Repair
b a
RXTM-R+RXTP-R+ARXTP-R+RXTA-B+FTXTA30B2V1B(W)
(B)+FTXTM30+40R2V1B+FTXTP25+35M5V1B+ATXTP25+35M5V1B
4
procedures" [ 174].
a
"Repair
R32 Optimized Heating 4 Split
ESIE21-12A – 2022.02